RecommendedStandard measurement
Radtrak3® detector for 3 months. The most precise and reliable measurement to determine the annual average radon concentration.
- Analysis in an ISO/IEC 17025 accredited laboratory
- One detector per living space

The official classification groups radon by whole municipalities. This map goes down to the ground: it shows the probability that the soil beneath each location releases radon, based on the lithology of the Continuous Geological Map (GEODE) by IGME.
Two buildings in the same municipality can sit on very different ground. This layer is informative and does not replace the official CTE DB-HS6 classification or the workplace radon obligations. Only measurement confirms the radon in a building.
Tap the map to see what lies beneath a specific point. The grey lines mark the municipal boundaries.
Geology guides, it does not decide: 54% of homes measured above 300 Bq/m³ lie in higher-probability areas, and 4% of those in lower-probability areas exceed that level. Construction quality and building age also matter: two buildings on the same ground can give very different readings.
This map is indicative and does not replace the official classification. Even where it shows lower probability, if your building work is in a Zone II municipality the building code solutions still apply, and if your workplace is on the ground floor or below grade you are still required to measure. Check the obligations: CTE regulation · Workplace regulation
With the map focused: arrow keys to pan, + and - to zoom.
This map applies the lithological classification criterion defined in the following study, not its full methodology, which additionally combines terrestrial gamma radiation measurements: Briones, C., Jubera, J., Alonso, H., Olaiz, J., Santana, J.T., Rodríguez-Brito, N., Arriola-Velásquez, A.C., Miquel, N., Tejera, A., Martel, P., González-Díaz, E., Rubiano, J.G. (2024). Indoor radon risk mapping of the Canary Islands using a methodology for volcanic islands combining geological information and terrestrial gamma radiation data. Science of the Total Environment, 922, 171212. doi.org/10.1016/j.scitotenv.2024.171212
Geological cartography: GEODE, Geological and Mining Institute of Spain (IGME). Data origin: ©CN Instituto Geológico y Minero de España (IGME). Date of access: July 2026.
Municipal boundaries: © Instituto Geográfico Nacional (CC BY 4.0).
Own work. This map does not come from the cited authors nor is it endorsed by them.
Legal obligations depend on the official municipal classification of the CTE DB-HS6, both in construction and in workplaces.
Direct purchase for homes and private individuals.
RecommendedRadtrak3® detector for 3 months. The most precise and reliable measurement to determine the annual average radon concentration.
Out of stockRapidos detector for 5-10 days. Results in less time, but less representative than the 3-month measurement.
This measurement is indicative. For reliable results, we recommend the 3-month standard measurement.
Out of stock right now
Call or write to us and we will tell you when it is available again.
Measuring in a company, a workplace or a construction site? Those measurements are quoted individually and are not bought here.

Monday to Friday, 7:00 to 15:00